Wednesday, March 24, 2010
Jacket + Sweater = Cropped Jacket + Dress
A good quality but rather boring plaid jacket is spiced up by being cut under the bust into two pieces. The sleeves are cut at the same line. Trim is sewn around the cut edges. The bottom of the jacket is sewn on to the bottom of the sweater. The sleeve bottoms are opened up and sewn together in a square. Triangles are sewn at the side seams to create a bottom for the handbag. A stiff insert is fit into the bottom of the handbag. Eyelets are made at the top of the handbag seams. Split key rings insert into the eyelets, and the handle attaches to the rings.
Tools and Materials
2 yards trim
2 split key rings
Stiff insert for handbag bottom
Thread, scissors, pins, sewing machine
Cut the jacket, lining and sleeves under the bust, adding ½” seam allowance for the trim, and sew the trim on top. The bottom of the jacket and lining is sewn on to the bottom of the sweater just above the ribbing. Place right sides together and stitch.
The sleeve bottoms are opened up at the seam opposite the buttons, which will be at the top of the handbag. Pull the lining up out of the way, and sew the jacket sleeves together down the sides and across the bottom. Triangles are sewn at the inside bottom of the two side seams to create a flat bottom for the handbag. A stiff insert is fit into the bottom of the handbag. Then sew the lining together around three sides, add the triangles, and push the lining into the handbag. Eyelets are made at the top of the handbag seams according to the package directions. Split key rings insert into the eyelets, and the handle attaches to the rings.
The cropped jacket and handbag were shown in the 2009 Summer Issue of Altered Couture Magazine.
Jacket and sweater before